Power washing your home’s exterior may not be one of your leading priorities and focus. But this method can be the most effective and proficient way to clean and sanitize your home’s peripheral and safeguard your investment, your time, and your family’s health. With that in mind, here are the 7 tips for Power Washing your home’s exterior in Orange CT.

1. Inspect Your Home’s Exterior First

Inspecting and checking first the exterior’s house is very vital when you want to try power washing. Many factors make your exterior weak and damaged, so before performing this method, it is a must to repair the affected areas to avoid bigger and future problems. Moreover, make sure to clear off any debris in the area that you want to clean. At the same time, you must not forget to clear the bottom part of your house siding of the bushes so that you can pressure clean the filthy bottom areas with great ease.

2. Do Research On The Surfaces That Should Not Be Power Washed

Power washing is very beneficial when you want to clean house siding made of vinyl, aluminum, steel, wood, stucco, and brick. However, not all surfaces can be power washed so, before performing make sure to make brief research. One of the things you need to avoid when performing this method is windows as they could break, don’t use too much force on your home’s siding to avoid leaking and always focus to prevent damage or injury. At the same time, cover openings and vents with tape or plastic to avoid leakage and avoid cleaning exterior furniture because the risk of damage is high.

3. Check And Examine For Power Lines

Power washing can be dangerous when not planned properly so it is very important to check for connected lines above the ground or along the edge of your house. When performing power washing make sure that you don’t hit the extension wand and further touch the wand to the power line because there is a higher risk of electrocution. It is better that you may turn off your power outlets to avoid the electric shock that may cause damage to your home’s electrical system.

4. Avoid Using Ladder

Using a ladder when power washing is not recommendable because the risk of having an accident is very high. Power washing has high pressure that may cause you to lose all the balance and the chance is you will fall. Thus, it is safer and efficient to use scaffolding, elevated work platform vehicles, rope access techniques, or extension wands.

5. Prioritize Your Safety

Eye protection is a must-have while conducting power wash because it can lessen the risk of accidents. Therefore, using eye protection should be mandatory since debris can spray back onto your face. Moreover, make sure that your equipment is in good condition and as much as possible, choose a day that is low wind and no rain.

6. Use Correct Equipment And Materials

Using the correct materials can make your job easier, extension wands are one example which is used to clean the higher areas. An extension wand will make your power washing easy especially if your house is a two-story building. In addition, there are additional attachments that you can put on the end of the extension wand to allow you to clean the gutters out while standing safely on the ground.

7. Are You Suspecting Lead Paints?

Lead paints are already banned in residential areas but if you're suspecting that your house is painted with lead, it is very essential that you follow all the local building codes and guidelines to get rid of it safely and successfully.